Salt air, sustained onshore wind and wind-driven rain are hard on a roof in Melbourne. Find and compare local roofing contractors covering Melbourne and the rest of Brevard County.
We're matching you with available pros now. Expect a call shortly, or reach us directly at (800) 555-0238.
Tell us what you need and we'll connect you with available local pros. Free, no obligation.
We're matching you with available pros now. Expect a call shortly, or reach us directly at (800) 555-0238.
Full tear-off and re-roof when repairs no longer make sense, or when your insurer says the roof has reached the end of its useful life.
Targeted repairs, a handful of shingles, a failed boot, a flashing detail, a small area of damaged decking.
Find the entry point, stop the water, dry out what got wet, before the ceiling and insulation go with it.
Post-storm inspection, emergency tarping and repair after wind, hail or a tree limb finds your roof.
Condition inspections, insurance-driven roof inspections, and wind mitigation inspections that can affect your premium.
Attic ventilation, ridge vents, soffit intake and gutters, the parts of the roof system that quietly decide how long it lasts.

Those dark streaks running down Florida roofs are almost never dirt. They are a blue-green algae that thrives in our humidity and feeds on the limestone filler in asphalt shingles. Cosmetically it is ugly; practically it holds moisture against the covering. Algae-resistant shingle lines are widely available and are worth asking about on any Melbourne re-roof, along with an honest look at whether the attic is actually ventilating.
A useful local pattern: homes in a Melbourne subdivision were built within a year or two of each other, with the same covering and often the same crew. When your neighbours start re-roofing, that is a meaningful signal about your own roof, not a coincidence. It is also the moment when out-of-state crews start canvassing the street, so it is worth knowing which contractors are actually local before someone knocks.
Close to the water, corrosion is a specification problem rather than a maintenance problem. Fasteners, flashings, drip edge and any metal component need to be selected for a marine environment, and mixing incompatible metals is one of the quickest ways to ruin an otherwise excellent roof. If you are near the ocean or the Intracoastal, ask each contractor specifically what they are using and why.
The most common reason a homeowner in Melbourne replaces a roof right now is not a leak: it is a letter from an insurance carrier. Florida insurers have tightened what they will write and renew, and roof age or roof condition is frequently the deciding factor. If you have received a non-renewal notice or a new policy conditional on a new roof, get the requirement in writing from the carrier, ask them what documentation they need at the end, and arrange a wind mitigation inspection once the work is done.